PRO-LOK Tools

Case for the Killer Jig

Take your killer jigs, bits and other tools with you anywhere in this specialty constructed Heavy Duty Carrying Case. Designed from rugged hard plastic, the case features a heavy duty custom...

Key Decoder – KW1,SC1,WK1 & WE1

The KW1,SC1,WK1,WE1 Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for Kwikset, Schlage, Weiser, Weslok keys.

Long Reach Accessory Tool & Extender

The Long Reach Accessory Tool is ideal for reaching inside pull handles which are located in recessed, tight places. This tool can be used as stand alone tool or used to extend the reach of the AO42...

Cruiser/Kompressor Car Opening Tool

The Cruiser/Kompressor Car Opening Tool features a tip with two sides. The short end opens Land Cruisers and Lexus LX450. The long end opens the Mercedes SLK 230 Kompressor.

Button Lifter Multi-Car Opening Tool

The Button Lifter Multi-Car Opening Tool (MCOT) is designed to reach under windows to unlock vehicles with raised vertical buttons. Simply remove the protective cap and use the precision ground tip.

Killer Jig Installation Kit

The Killer Jig Kit includes everything a professional installer needs to prepare doors and door jambs for hardware. Everything is stored in a heavy duty case with custom Polyurafoam interior to hold...

Deluxe Zippered Case for Car Opening Tools

The Deluxe Zippered Case is made from heavy duty cordura, featuring sturdy handles, four (4) storage compartments, and a full length zipper. The center panel divider keeps wire tools in place with a...

Round Jim Car Opening Tool

The Round Jim is specially designed to unlock vehicles with exposed bellcranks, such as the Volvo 960, S90/V90 or the Porsche Boxter/911.

ASSA Key Decoder

ASSA Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for ASSA keys.

Flat Door Panel Tool

The Flat Door Panel Tool is a spatula” style door clip remover. The tool slips around the base of the door clip, between the car door panel and the steel door, to allow you to carefully pry the door...

Handle Opener Car Opening Tool

The M.C.O.T. Handle Opener Tool is designed to access and manipulate closed pull handles on vehicles that have stiff handle springs or which require higher pull strength than traditional M.C.O.T...

Blue Punch Molded Case

Take your Blue Punch machine with you anywhere with this specialty constructed Blue Punch case. Designed from rugged hard plastic, the case features a sturdy handle for easy transportation, a...

Camry/Lexus Car Opening Tool

The versatile Camry/Lexus Car Opening Tool has a double sided design for opening Toyota Camry and the rear door of the Lexus LS 400 sedans.

Jig Part – Auger Wood Bit

The Heavy-Duty Auger 1? Bit made of manufactured steel will cut quickly with minimal friction heat so your tools last longer. Designed to bore the edge hole for most deadbolt locks and latches on...

CLAMP ON SLIM JIM

CLAMP ON SLIM JIM

Wide Multi-Car Opening Tool

The Wide Tool is a Multi-Car Opening Tool (MCOT) is designed to access a variety of vehicle types with wide door panels.

Under the Handle Tool Car Opening Tool

The Under the Handle Car Opening Tool is designed to push horizontal and vertical linkages accessed behind pull up” type exterior handles.

1-1/2? Bushing Plate

The hardened steel bushing plate used for locks requiring a 1-1/2? cross bore.

Porsche 928 Car Opening Tool

The Porsche 928 Car Opening Tool is ideal for opening a Porsche 928 on the driver’s door quickly and professionally.

Honda Tool Car Opening Tool

The Honda Tool (Double Ended Hook and Lift Tool) is designed to make opening foreign and domestic vehicles with a horizontal or vertical linkage super easy.

Dual Tool Car Opening Tool

The versatile Dual Tool is actually two (2) tools in one. The each side of the double ended tool is capable of unlocking many types of foreign and domestic vehicles.

15 Piece Premium Car Opening Tool Kit

The 15 piece Premium Car Opening Kit is an excellent tool for those wish to invest in a high quality lockout kit. This set of Premium tools assures that you will not only receive 13 of our best...

WINDOW WIPER

WINDOW WIPER

Black Key Hooks (100 per bag)

pliable and durable Black Key Hook with unique no-spill hook design securely holds 25-30 blanks in place until deliberately removed. Made from a specially formulated material to prevent drooping or...

Euro Strip Car Opening Tool

The Euro Strip Tool has a flexible design which allows technicians to bypass doors on foreign and domestic vehicles. Machine cutout with a heavy duty rubber band for extra strength.

Back Flip Car Opening Tool

double sided Back-Flip Car Opening Tool is designed to reach above and behind the plastic guard plates on foreign and domestic vehicles.

Fat Tool Multi-Car Opening Tool

The Fat Multi-Car Opening Tool (MCOT) is designed to bypass window regulators that run the length of the window glass, inhibiting the entry of the original type M.C.O.T. tools.

Light 3-Cell Hardbody

The 4.5v switchless Hardbody Light with aluminum body and flexible wand allows you to reach those hard to see places. Powered by three (3) AA batteries. Includes suction cup clip, hard shell case and...

Chrysler Tool

The Chrysler Car Opening Tool enters the lock just like a key, works on all Chrysler/Dodge with a cylinder drain hole. Full Color Instructions included.

Key Decoder – Medeco, Master & American

The Med, Master & AmPad Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for Medeco small pin, Medeco large pin, Master Padlok, American Padlock keys.

Jig Part – Spur Wood Bit 2 1/8?

The Heavy-Duty 2-1/8? Multi-Spur Bit made of manufactured steel will cut quickly with minimal friction heat so your tools last longer. Designed for use on locks requiring 2-1/8? cross bore on wood...

QUICK CHANGE ADAPTER

QUICK CHANGE ADAPTER

Astro Tool

The Astro Tool is an extremely useful, double ended car opening tool with a hook and reach designed to open the Chevy Astro or Safari Van and several other GM cars. Full Color Instructions included.

Button Finger Multi-Car Opening Tool

The Button Finger Multi-Car Opening Tool (MCOT) is modified to operate the vertical buttons on various foreign and domestic vehicles. Remove the protective cap to use the precision ground tip.

Jig Part – Deadbolt Marker

The 1-1/8? x 2-1/4? in. Heavy Duty Deadbolt Marker is used for marking the wood door when mortising many commercial deadbolt and latch face plates.

Key Decoder – GM, Chrysler, Ford & 10cut

The GM, Chry, Ford & 10cut Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for GM, Ford, Chrysler and Ford 10-cut keys.

Spring L” Car Opening Tool

The Spring L” Tool is one of the most versatile car opening tools. Allows technician to lift and push bell cranks on many car models.

GM S10 Tool Car Opening Tool

The versatile GM S-10 Car Opening Tool is designed to unlock 1980 – 1989 model GM trucks, such as the S-10 Blazer and GMC Jimmy, as well as vent windows.

Jig Part – Lip Strike Marker

The 1-3/4? x 2-1/4? in. Heavy Duty Lip Strike Marker is used for marking the wood door when mortising many standard deadbolt-latch strike plates.

76? Extra length Long Arm Car Opening Tool

designed to enter into the passenger compartment of the vehicle through the door using wedges and/or door jack type tools. The soft vinyl tip allows for easy manipulation of the interior lock...

Jig Part – Spur Wood Bit 1 1/2

The Heavy-Duty 1-1/2? Multi-Spur Bit made of manufactured steel will cut quickly with minimal friction heat so your tools last longer. Designed for use on locks requiring 1-1/2‘ cross bore on wood...

Double Slide Tool Car Opening Tool

The Double Slide Tool is a multi-functional tool with a short reach for narrow doors and a reverse tip for reaching under horizontal linkage.

Slide Jim Car Opening Tool

The Slide Jim Car Opening Tool is a double ended tool, designed to unlock many cars with exposed horizontal lock linkages. The L” end is used to manipulate bell cranks while the U” end is used to...

Long Reach Tool Sleeve

Use the Long Reach Tool Sleeve to protect the glass, weather stripping, paint, and edge of the door from tools while performing an auto opening.

Jig Part – Strike Locator

The Strike Locator is used to mark a door jamb for proper installation. After a 1” in. edge bore is drilled, insert the Strike Locator, close the door, put pressure on the punch and the sharp center...

IC/A2 Decoder

The IC/A2 Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for Best/Falcon & other I/C keys using standard A2 increments.

SC1 Decoder

The SC1 Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for all Schlage & other (Schlage type) keys using factory increments.

Behind the Glass Car Opening Tool

The versatile, double ended Behind the Glass Car Opening Tool is designed to gain vehicle access to horizontal linkage located above and behind the glass.

Jig Part – Strike Plate Marker

The 1-1/8? x 2-3/4? in. Heavy Duty Strike Plate Marker is used for marking the wood frame when mortising many standard deadbolt strike plates.

HARDBODY LIGHT 2-CELL 3V

HARDBODY LIGHT 2-CELL 3V

Jig Part – Latch Marker

The 1? x 2-1/4? in. Heavy Duty Latch Marker is used for marking the wood door when mortising many standard deadbolt and latch face plates.

GM L” Tool Car Opening Tool

The versatile GM L” Car Opening Tool allows technicians to lift and push bell cranks on many GM model vehicles.